Pletscher Zoom Kickstand
A lightweight good looking kickstand which is adjustable to various lengths. Available in black or silver with large foot for a secure stand.

Pletscher double Kickstand
This is the famous double kickstand, Great for touring bikes with handlebarbags or heavy loaded bikes of all sizes.It folds to one side and looks like a regular kickstand. Does NOT hang down behind the bottom bracket and gets hung up on curbs. Like all Pletscher kickstands it works for years without the dreaded wobble. Great on tour for small wheel repairs or to adjust the shifting ( as it lifts up the rear wheel and its out of the way enough to pedal the wheel. Available in black or silver

Double Shoes
Make the double kickstand even better with a pair of matching shoes

Deluxe top plate
two plastic sleeves protect the chainstays, comes with top plate and longer bolt, fits most steel frames and alloy frames with smaller than usual chainstays. Prevents kickstand from sliding away if your bike doesnt have a kickstandplate. The picture is a beautiful Surly. ( Thanks Alan )

Pletscher REAR Multi ZOOM Kickstand
Pletscher Multi Zoom . More adjusability than all other rear kickstands on the market, now available in the zoom version. Available in black or silver

Pletscher COMP ZOOM Kickstand
Attention : this kickstands mount on existing chainstay plate on your bike. If there is no double hole plate brazed into your rear stay approx 5 inches away from the axle this kickstand will NOT fit. Lots of European touring bikes as well as Specialized Globe bikes have this option. Available in black or silver

Pletscher Standard Kickstand
Pletscher Esge Kickstand. This is the standard kickstand all others are measuring up to ( or at least they pretent they are, as this kickstand has the wobblefree patented Pletscher innards, all others are trying to copy without much luck. Comes with top plate and screw/washer

F12 Shoe
Give the standard kickstand a better footing to stang on. Looks good too !

Pletscher CS Rack
This is the rack Pletscher became known with. Those racks were copied from all over the world. However customers found out that the alloy the competitors were using was and still is not even close to the stringent Pletscher Q/C. Comes with J3 double seat stay clamp

Pletscher front Athlete
2 legs. A perfect front carrier. Can also be used as a little shorter than usual rear carrier with Center brake hole mounting. Comes with (no: 51598) single front brake centerhole mounting

Pletscher Athlete SYSTEM
4 legs Athlete rear with easy Fix "SYSTEM". This 55 lbs rated carrier has three holes which allow several Pletscher accessories to be mounted rattlefree with no tools. Of course it works like a regular carrier as well. All alloy with stainless fittings for braze ons on the seattubes. Great sturdy carrier

Pletscher Athlete SYSTEM
same as above but especially for 20 inch bikes like Dahons. It comes with extra mounting hardware for a truly custom look.

Pletscher Athlete SYSTEM QUICKRACK
4 legs Athlete rear with easy Fix "SYSTEM". This 55 lbs rated carrier has three holes which allow several Pletscher accessories to be mounted rattlefree with no tools. The QUICKRACK version comes with a seatpost quick release ( 25 to 33 mm dia, also works on Dahon 34 mm seatposts with one longer not suplied bolt).
The quick release mounting on the seatpost is only half the QUICKRACK feature. The Carrier comes with special offset boltscrews for the frame, allowing to release the 4 legs without tools.
This is a great carrier when you dont always need one, but if you do , you dont want to sacrify stability and payload.

Watch the Youtube clip Pletscher QUICKRACK and Easifix System

QUICKRACK cam bolts
Get an extra set of QUICKRACK cam bolts for a second bike

Pletscher QUICKRACK Suspension
Same as the Athlete QUICKRACK this rack can be demounted without tools in seconds. The trick with this rack is that it works on any suspension bike. While the rear wheel moves up and down the carrier pivots around on 3 pivot points and the load stays stable.
It comes with its own bungee cord.

QUICKRACK cam bolts
Get an extra set of QUICKRACK cam bolts for a second bike

Orion Seatpost Rack
The Orion fits seatpost from 25 to 33... the 34 mm DAhon Seatpost will work as well. ( Much better if you get a little longer staionairy bolt from your local hardware store ) .
The Orion features a nice holding case for small tools or even a mini pump. Great Place for a rear light as well. One nice feature is that you can adjust the angle to the seatpost and make this rack look totally custom.
It comes with its own bungee cord.

Easyfix Shopping Basket
Pletscher Mesh Shopping basket. This is a large Mesh basket, which comes with the Easy Fix attachment points. Attach it to any of the SYSTEM Carrier with the 3 easy Fix holes

Easyfix Comfort Rack Pack
Pletscher Comfort Rack Touring. Max 24 ltr. The side packets can either be used extended hanging below the rack like small panniers or folded up.
It comes with the Easy Fix attachment points. Attach it to any of the SYSTEM Carrier with the 3 easy Fix holes

Easyfix Comfort Rack SPORT
Pletscher Comfort SPORT. 12 ltr.
It comes with the Easy Fix attachment points. Attach it to any of the SYSTEM Carrier with the 3 easy Fix holes

Easyfix plastic adapter
Adapter to be used with your own bag or basket, bolt it on and use it with any of the SYSTEM Carrier with the 3 easy Fix holes

Easyfix Hard Shell Case
Pletscher Hard Shell Case, with lock, water resistand. It comes with the Easy Fix attachment points. Attach it to any of the SYSTEM Carrier with the 3 easy Fix holes

Easyfix Child Seat
Pletscher Child carrier. With suspension for a soft ride. It comes with the Easy Fix attachment points. Attach it to any of the SYSTEM Carrier with the 3 easy Fix holes
This is an expensive Childcarrier but our little ones derserve the extra security and comfort. Please also invest into a good child/baby helmet !

Attention
Please note: All carriers do NOT have the bolts to mount them onto the bike.
In many case the bike manufacturer has provided bolts in their respective frame braze ons.
In case you are lacking them, any hardware store usually has a wide variety to fit your bicycle.
Bicycle stores have various lengths and refer to them as " waterbottle bolts"
Most carriers and kickstands do NOT have mounting instructions, you can find more details at www.pletscher.ch.
In general it is assumed that you have the necessary experience and tools to mount these yourself, in case of any difficulties we suggest to find a friendly dealer and have him do the install.