Dahon Handlepost Latch CATCH
its the square plastic piece where the latch engaged when you open it all the way

does NOT come with screw, just use the old one

Dahon Handlepost latch for outside folding handlebars like on Briza or Jetstream
43-1-01

Dahon Handlepost Safety Latch

Dahon Handlepost Safety Latch for older Bikes
like Boardwalks, these have a smaller diameter than the newer ones

Dahon Frame Safety Catch right side
like Mariner and many other current bikes

31-2-13,KS16KC000003

Dahon Frame Safety Catch LEFT side
like MU and some other bikes

31-2-14, KS16KC000004

Dahon Frame Safety Catch Right side GREY
2005 ? some older bikes

31-2-15,KS16KC000001

Dahon Frame Safety Catch LEFT side
MU frames bikes
picture shows two catches, you are getting ONE. Look at the upside down one, it has a ridge for the MU Clamp.
31-2-16, KS16WV000001

Dahon Frame Safety Catch LEFT side
MU, Briza, Glide bikes
picture shows two catches, you are getting ONE. Look at the upside down one, it has a ridge AND reinforcements .
31-2-17, KS16WV000002

Complete bolt set to replace worn pieces on the Lockjaw assemblies, top and downtube bits
31-2-02

Forged Alloy Latch, Espresso, Jack, etc
Dahon Number is 31-02-09

Forged Alloy Latch, newer Mu ( V clamp ), Curve Newer model, Latch on the left side
31-2-11

KA Frames like the Alloy Mariner ( Silver ) Vitesse and older MU frames, also older Curves ( latch on right side )
Dahon Number 31-2-06

Steel Latch, for Speed etc.
The Latch is approx 101 mm ( almost 4 inches ) long, and at the fixed to the frame width 27 mm ( 1 .04 inch )wide.

Dahon Number 31-2-03

Frame latch for SUV, 31-2-08

for HT010C frames Steel Frame Latch Boardwalk
The Latch is approx 82 mm (3.2 inch) long, and at the fixed to the frame width 20 mm (0.79 inch) wide.

Dahon Number :31-2-01

for older 7 speed frames Steel Frame Latch Boardwalk, 31-2-04

Steel latch for older Dahons Boardwalk, steel Mariner
30-378

Steel latch for older Dahons r

Long version for Espresso or similar( 68mm ). Short for Mariner or similar ( 56 mm )

Steel Latch Boardwalk Handlebar
41-1-02

Steel Latch older Boardwalk Handlebar
HP350p30

for radius 5, fits Mu, Speed, and others, usually newer late models 2011-2013
they might come with a wrong size top nut, either use your old one, or replace with a regular star nut and top cap
90-565

INTERNALS for radius 3, fits Speed D7, Speed D8, Mariner, and others, most models, 90-565-4

overtigthened or leave way too loose the handlebar folding mechanism in your Dahon Radius 3 Handlepost, and now the block is cracked. Resulting in a wobbly handlepost ?
ThorUSA to the rescue, we have those blocks :-)

41-1-19, Speed, Vitesse, Curve, Mu P9/10, Mariner, Boardwalk, Vybe

Please note that my shopping cart will charge 10 dlr for freight for all USA customers automatically, I cannot change that for any individual item listed. Therefore I suggest that you peruse my other offerings and combine shipping.
For our customers offshore, see also the shipping tap on top of the page.

overtigthened or leave way too loose the handlebar folding mechanism in your Dahon Radius 3 Handlepost, and now the block is cracked. Resulting in a wobbly handlepost ?
41-1-20 A little bigger with a 3 degree, Ciao, IOS, Briza, Jetstream, Mu LT, Mu SL , Visc, Vigor

overtigthened or leave way too loose the handlebar folding mechanism in your Dahon Radius 3 Handlepost, and now the block is cracked. Resulting in a wobbly handlepost ?
Black for Curl, 41-1-21